05-01-2013, 10:23 PM
(05-01-2013, 08:31 PM)fastpostie Wrote: I would like to over hang mine to fit equipment between the head board and the Trayon but my anchor point is already at the extreme rear edge. Can I move it back and if so how.
I used 316 stainless turnbuckles in place of the factory rear clamps. This allowed me to overhang the unit on the tray. To be sure I plated the rear corners of the tray where turnbuckles were to hook into and gusseted them as well. Trayon were happy with this. Have had no movement issues.